1Ch Fiber Optical Video Transmitter and Receiver
1Ch Fiber Optical Video Transmitter and Receiver
1Ch Fiber Optical Video Transmitter and Receiver
- Detail
- Parameters
1Ch Fiber Optical Video Transmitter and Receiver
Fiber Optical Video Transmitter and Receiver
For CCTV Security Surveillance
This fiber optical video transmitter and receiver can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video / reverse or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one single mode or multi mode optical fiber. These multiplexers are typically used in applications where the cameras have PTZ capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment.
Features
* 8-bit digitally encoded and non-compression broadcast quality video transmission;
* Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols;
* Support any high-resolution video signal;
* Automatic compatible PAL, NTSC and SECAM video system;
* Power supply and other parameter state indication, which can monitor the operation condition of system;
* Support no-damage regenerative trunk of video;
* Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required;
* Special ASIC design;
* Hot-swap function;
* Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis;
Application
* Intelligent Transportation System
* Connection of Sub-network for Surveillance Center
* Public Security Surveillance
* High Way & Toll Station Surveillance
* Industrial Closed Circuit Television Surveillance
Technical Specifications
1 Channel Video Series
Video Port | 1 | |
Video Interface | BNC | |
Video bandwidth | 8 MHz | |
Automatic compatible video system |
PAL,NTSC,SECAM |
|
Video in/output impedance | 75 Ω(unbalance) | |
Video in/output Voltage | 1.0Vp-p,max 1.5Vp-p | |
Video signal-to-noise ratio | ≥65dB | |
Differential gain | <1% | |
Differential phase | <0.7° | |
Fiber-optic Specification | Connector: FC/ST/SC Transmitter: Tx Power:-15 ~ -8dBm Sensitivity :≤-35dBm Receiver: Tx Power:-15 ~ -8dBm Sensitivity :≤-35dBm Transmission Distance: 2km(mm), 20/40/60/80/100km(sm) Operating Wavelength: Tx1310/Rx1550(Transmitter),Tx1550/Rx1310nm(Receiver) | |
Dimensions: 91(L)×94(W)×25(H)mm
Weight: 1KG
Operating Voltage: DC5V, AC100-240V
Operating Temperature (℃): 0~50
Storing Temperature(℃) : -40~85
Humidity: 0 to 95% non-condensing
MTBF: ≥ 105 hours
Warranty: 1 year
Specification of Customized Options
Data | Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : DC ~ 300Kbps BER: ≤10-9 |
Audio | Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:20HZ~20KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥85dB |
Telephone | Connector: RJ11 Bandwidth :8KHZ Features: Support call-showing function ;support H-F Operating mode : Point to point hot-line mode / FXS-FXO |
Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Data rate: 10M / 100Mbps Bandwidth: 25M |
Contact Closure | Physical connector: Industrial standard connector port Alarm output: Support any type of active or passive alarm output Data Interface: Support TTL, RS232/485/422 or relay output |
Optical Budget | Multi mode / 20dBm / 2KM Single mode / 20dBm / 20KM Single mode / 22dBm / 40KM Single mode / 25dBm / 60KM |
Naming scheme of This Video Converter
Order Information
Model | Description(FC,SM,20KM) |
1VF-T/RS | 1ch video |
1V1DF-T/RS | 1ch video + 1ch reverse rs485 data |
1V1AF-T/RS | 1ch video + 1ch unidirectional audio |
1V1EF-T/R | 1ch video + 1ch 100M Ethernet |
1V1PF-T/R | 1ch video + 1ch Telephone |
1V1CF-T/R | 1ch video + 1ch Contact Closure(Dry Contact) |
